Version 0.86

[Wanilton]

James,

Good Morning
Download again my voxcommando directory full...it´s ok now
http://github.com/downloads/Wanilton/VoxCommando/VoxCommando.zip

James,

I need a favor, extract and test the vox with the aeon skin MQ, I have a symptom that can no longer correct,. Test it, run Media Center, XBMC boot it (launch)
After that already in the main XBMC I start to have the following symptoms
Disappearance of the background getting black screen, which is alternating all the time, image, black screen, black screen image.
Now I see a stranger, this only happens if I boot XBMC via vox, because if I first run XBMC and then run the vox, the error does not happen, it's like to ask to run the application, it generates the problem.
I'll make a video because I see no logic to it.

[jitterjames]

It is strange because I had this exact behavior with the styles background flash on and black in AeonMQ and it happened when vox was not running.

So are you saying

it happens only when:

- you open XBMC from VoxCommando by using the Launch command

or does it also happen if:

- VC is running, but you open xbmc by starting xbmc normally by clicking the xbmc.exe shortcut?

[Wanilton]

This situation happens for me only

I  open XBMC from VoxCommando by using the Launch command, cause this behavior (alternate background for black, sometime background flash).

If I execute  first XBMC  and open VOX after, it´s ok, no happen this situation...no alternate background, it´s ok...

Agora em PT BR

Efetuei diversos testes, e não entendo, se eu executo manualmente, dando duplo clque no XBMC, sem o vox estar rodando, tudo funciona corretamente,
e ao executar o vox, continua funcionando corretamente.
Agora se eu inicio o voxcommando, e lanço o aplicativo XBMC,começo desde o início a ter background preto, alternância, e outros comportamentos estranhos.

Estou gravando um vídeo ilustrativo do caso para analíse,

Wanilton

[jitterjames]

does it happen if VC is running but you don't use launch to open xbmc?

[Wanilton]

James, I'm uploading a video explaining the case, as you pass the download link ..

The video gives a clear idea of what happens, these situations are perceived only when I run XBMC giving the launch command via VOX, Media Center XBMC to run commands and errors start to appear.
If I reverse the procedure first run XBMC, then run the vox on this sequence, everything works without these problems mentioned, seeing the video you will understand, the only difference is you do not use the LAUNCH command,
video was made the rush is not perfect, is just to understand what I am exposing.

Download
http://github.com/downloads/Wanilton/VoxCommando/testejames.avi

[jitterjames]

OK.  It seems like XBMC does not like to be launched directly from VC.  But this only happens with the AeonMQ skin.  Weird.

I used your configuration to launch xbmc, no problems at all.  I have:

Aeon MQ 2.5
XBMC Dharma rc 2
windows 7 32 bit.

I will see if there is a way to launch differently.  Can you try this?

- create a batch file that runs xbmc.
- use the VC launch command to run the batch file.

see if that fixes it.

[Wanilton]

James, forgive me, but the language barrier often confuses me, is not that you do not want to answer your questions.
Sometimes I find it difficult not to explain, but to pass the problem properly, so I opted for the video is not the most practical way I'm sure, but I think at least you'll see exactly what happens here with me.
I'll try to explain more about this issue ...

What's mistake? the error occurs in XBMC in the background image, xbmc alterne black screen and image of background ..

How does it occur? Only when using the Launch command to start the XBMC via vox.. .

When not done? As first start XBMC normally without using the launch in vox. After starting the XBMC, I can start use vox, without that problems happen in XBMC ...

A priori it seems that what causes the problem is to start XBMC, using the command launch on Vox.

Clear now for you?

My configuration is:
Aeon MQ 2.5
XBMC Dharma rc 2
windows 7 64 bit.

[jitterjames]

about your "Home" command not working.

I will repeat what I have said many times before:  1 syllable commands are not a good idea!

Also, it is probably a good idea now that you have the Amulet remote, to create a new clean profile using it.

I have found that the Amulet microphone works better if the input level is down closer to 60, not at 100%.

As with any microphone do not hold it too close to your mouth or it will pick up the sound of air blowing on the microphone or create other distortions.  4 inches is probably good.

[Wanilton]

thanks for tips...

[jitterjames]

How does it occur? Only when using the Launch command to start the XBMC via vox.. .

When not done? As first start XBMC normally without using the launch in vox. After starting the XBMC, I can start use vox, without that problems happen in XBMC ...

I'm sorry but you are still not answering my question.  the video does not answer the question.  I need to know exactly when this problem happens.

I need you to test by doing this:

1) open vox commando FIRST.
2) then open XBMC using your mouse.  Do not use the launch command to open it.

I need to know if the problem comes from using the Launch command, or if it comes from running XBMC after VC is already open.

[jitterjames]

also, can you test with the confluence skin please.

[Wanilton]

James,

First ran the voxcommando, ran after the XBMC with a mouse, no errors too ...

then switch to the confluence, and there came the surprise Launch tested the command and no problems there ...
switch again to aeron MQ2, and  used launch command again same errors, then close XBMC, keeping the same
session of the vox open, and started with a mouse the  XBMC aeon skin as default, with no errors this time.
 

it seems it is a problem in the AEON skin when started with the command Launch only.


Wanilton

[jitterjames]

OK Good.  Now at least we have a pretty clear idea of when it happens.

Try the attached.  Is it any better?

Attachments removed... there is a newer version

[Wanilton]

James, download again
http://github.com/downloads/Wanilton/VoxCommando/VoxCommando.zip

I Try all comands Launch, but no success not run XBMC, rename then the xbmc.bat to xbmc.exe, so run, but with errors

[jitterjames]

I can't think of anything else to fix the problem that you are having with your background when you launch xbmc from VC, but I will see if I can figure out how to launch a batch file correctly tomorrow.