Messages

1

Kodi (XBMC) Frodo / Gotham / Isengard / Jarvis / Re: Control Kodi On Android Device (Nvidea Shield)

« on: June 27, 2019, 05:05:15 PM »

When I browse to a location, say episodes, then issue "select" command, it shows as it's working on pc and kodi instance, but does not play or enter. Is not the select button the same as ok on a remote or enter on a keyboard???

To play the highlighted item, I have to issue the play pause, is this normal?

2

Kodi (XBMC) Frodo / Gotham / Isengard / Jarvis / Re: Control Kodi On Android Device (Nvidea Shield)

« on: June 27, 2019, 02:26:17 PM »

Yes, I am using my own fork of Kodi 18.2. That did the trick for left, right, up, down, still have no "select" though.

3

VoxCommando Basics and Core Features / Re: Use VC to control Hubitat Hub

« on: June 27, 2019, 01:46:33 PM »

@jitterjames: Thanks for removing the token. It's all good, It's a test system/setup until I get everything working, then it will be wiped and everything built from scratch.

Yes, that was exactly what I needed, I found the correct url I needed a different way within the Hubutat app itself, it shows examples and what needs replaced such as ID, command, etc.. I tested the url in a browser and it worked, so I just pasted it into VC and boom!! Works perfect!!!

I was able to use the "toggle" command, since the switches supports it as a command, so I won't have to do a "on" & a "off" command, just the one and include the off and on in the phrases.

I want you to know that you folks are awesome, Vox Commando is a pretty amazing piece of software with how much you can do with it in a fairly simple manner. I have seen different things in it I am sure I will be playing with.

It amazes me that I had never heard of Vox Commando until a few days ago, and in just a few hours after  installing it, I was able to get my home automation working with voice control and 100% without the use of the cloud/internet (even controlling Kodi as well (well sorta, posted in appropriate thread)).

You have no idea how tickled I am and how easy this was (with your folks help of course!)  Thank you greatly to every single one of you that replied, I really, really  mean that!!!

BTW - The conference room mic I am testing with was like $15 and it works great about 8ft. (advertised 11.5ft). Still testing it though. I purchased VoxWav as well but haven't fooled with it yet. Since I will have a couple tablets wall-mounted, I figured it would work on them.

If you ever need a review or recommendation, fell free to hit me up....I assume you are the developer?

4

Kodi (XBMC) Frodo / Gotham / Isengard / Jarvis / Control Kodi On Android Device (Nvidea Shield)

« on: June 27, 2019, 12:02:23 PM »

I am totally new to VC, got it for a different project. Anyways, I installed VC and used Kodi in the setup to get an idea and learn VC and the command structure . I was very impressed how well it worked out of the box.

So far, the only thing I can't get to work is the navigation (left, right, up, down) and select. I get the "keyboard (pc only)". I am sure there is way to fix this??

Any help would be greatly appreciated.

5

VoxCommando Basics and Core Features / Re: Use VC to control Hubitat Hub

« on: June 27, 2019, 10:09:57 AM »

Okay, I have received the microphone. I installed VC (paid version) and chose kodi in the initial setup to get an idea of how the command structures work. (I am so glad VC is portable!). One of the biggest problems I am having learning VC is all the videos I find are so out-dated.

I am having navigation issues with that, as the stock Keyboard commands are for PC only and I'm testing it connecting to kodi on a shield (android). but I will post that in a different thread.

As per nime5ter's post, I am attempting to use the Hubitat's Maker API.

It is giving me a local url:

http://192.168.10.176/apps/api/193/devices?access_token=ABC123XYZ

It provides the following json or raw data on a simple switch: (its actually in a long string when I try to copy-n-paste it, but not in a browser)

[{"name":"Living Room Fan","label":"Living Room Fan","
type":"Zigbee OnOff Switch","id":"5","
date":"2019-06-24T17:30:45+0000","
model":null,"
manufacturer":null,"
capabilities":["Switch","Configuration"],"
attributes":{"switch":"on","dataType":"ENUM","
values":["on","off"]},"
commands":[{"command":"configure"},{"command":"off"},{"command":"on"},{"command":"toggle"}]}]


I am kinda lost on the 2nd step of nime5ter's post of Scraping it in VC. I created a new Group Collection (named it Hubitat), then a new group (named it outlets). I assume this is maybe where the scraping will come in?? (I will create more groups once I get one switch working and get a grasp on how to do all this.)

I may be in the wrong place, but then I created a command (command name Living Room Fan), then Edit > Action > Open Action Tree. I tried choosing Scrape as well as a Scrape.Simple, entered the url.

I am sure I need the toggle or on/off value somewhere? I might need to be using the "id":"5" somewhere as well???

If I can get it to use the toggle value, that would be best I think?

I will have like 30 of these once I get the first one figured out.

6

VoxCommando Basics and Core Features / Re: Use VC to control Hubitat Hub

« on: June 25, 2019, 04:03:39 PM »

@Kalle: No, I do not want to flash the sonoffs. I am already in the middle of replacing them all with Zigbee switches.

I already have the replacements, it's just a matter of taking down light fixtures and such, etc..

Thanks for replying

7

VoxCommando Basics and Core Features / Re: Use VC to control Hubitat Hub

« on: June 25, 2019, 03:17:12 PM »

@jitterjames: I hope the mic works well, range of 12ft with noise cancellation. If not I will look into VoxWav. I do use android devices, including tablets in which a couple are wall mounted for the home automation as well as 3 shields.

Mic should be here tomorrow....

Thanks for replying

8

VoxCommando Basics and Core Features / Re: Use VC to control Hubitat Hub

« on: June 25, 2019, 11:01:06 AM »

@nime5ter: Thanks for the welcome and a big thank you for pointing me to what looks to be some great information to get me started.

The primary functions I have been using my home automation so far is simple switches for lights, tv's etc.. I have dabbled with my own Kodi fork but had limited success due to ISP issues. (stuck behind carrier NAT and it doesn't allow me to do web hooks).

I had been using basic Sonoff switches. But unless you flash them, they rely on the cloud to work.

When I decided I wanted to eliminate the cloud for home automation, I ordered a Hubitat hub and a simple Zigbee switch for testing. The Hubitat is an amazing, VERY versatile tiny little feller with some incredible folks supporting it.

I have a entire house full of Sonoff switches that I am slowly replacing with Zigbee's now. The only hurdle I have, is if I want to continue to use voice control with the new set-up, I still have to use one of the 2 big guys. I can easily use a web browser on any device to control everything now, including scenes I set up in the hub with no cloud.

So the plan is to use a PC with VoxCommando with a conference room mic that has noise cancellation to be able to accomplish the same thing by voice. VoxCommando looks to be very very configurable and from what I am seeing has awesome support as well, so maybe I can get this working.

I have multiple PC's throughout the house, so if I can get it working on one, I can duplicate it throughout. Looks like this ole Papaw has a lot of learning and tinkering ahead...

Again, thank you and I will keep you posted

9

VoxCommando Basics and Core Features / Use VC to control Hubitat Hub

« on: June 24, 2019, 09:20:30 PM »

I am new to Vox Commando, actually waiting on a microphone to try it out. I was looking for a solution to get my home automation 100% offline. I have been moving everything over to a Hubitat hub and it is awesome via a pc or tablet. It works great with Alexa & GH as well, but I wanted to find a way to use voice control without either of them (Alexa or GH) and have it working with voice control even without the internet.

That led me here.  I talked with the owner of Hubitat and asked him if this could be done with VC and his reply was this: "There doesn't appear to be anything created. It may be possible but it would likely be you at the center of development."

Has anyone tried this, or can point me to any useful information on how I might get this project going? I should be good to start in the next couple days as soon as the mic arives.

Thanks in advance