Messages

1

Arduino support / Re: Getting the relay project to work

« on: December 18, 2017, 12:57:30 AM »

Is there a way you could integrate this with tasker ?

2

BEAM IR/RF Wifi transceiver / Re: Beam only wanting to learn some remote buttons

« on: November 06, 2017, 01:13:35 AM »

Another Issue now occurred So I have a mode on my fan that is a timer if you press it once you get 30 min of time and 30 min for each additional button press. How do i setup an event for my fan that runs like. If (fan_remote_timer) "30" press one If fan remote timer "60" press twice. its a little weird because im asking to associate a number to correspond to how many times an IR code is sent.

3

BEAM IR/RF Wifi transceiver / Re: Beam only wanting to learn some remote buttons

« on: November 05, 2017, 04:11:23 PM »

Thank you so much I appreciate all you guys on the forms helping us out.

4

BEAM IR/RF Wifi transceiver / Re: Beam only wanting to learn some remote buttons

« on: November 04, 2017, 11:12:05 PM »

FIXED I edited the map table so it sends code=24,73,24AABABBABAABABBABAABABABBAABBABABAABABABBAABB856

Also I edited it in this format and it also worked

http://192.168.254.200/sendIR?l=2&n=1&code=24,73,24AABABBABAABABBABAABABABBAABBABABAABABABBAABB856

5

BEAM IR/RF Wifi transceiver / Re: Beam only wanting to learn some remote buttons

« on: November 04, 2017, 11:00:12 PM »

So is there a way I could link it to a command to send it via VC or do i have to use the plugin every time or web interface I suppose that every time i want to control the fan I could open a hidden mobo.b with the ip address and tell it to fill the box with the raw code and send it but you can see that that is very messy

6

BEAM IR/RF Wifi transceiver / Re: Beam only wanting to learn some remote buttons

« on: November 04, 2017, 01:42:58 PM »

Sorry for the confusion Dave There is nothing wrong with the tv command I just included it to show what a working command looks like that was made using the command to set it up "I want to program my ....". Both the power on and turn fan on dont work and they where the 2 methods I have tried. The code for the fan is recognized when learning IR from the website interface BUT it is not recognized when utilizing the self building Xml command "I want to program my..."

7

BEAM IR/RF Wifi transceiver / Beam only wanting to learn some remote buttons

« on: November 03, 2017, 09:43:32 PM »

Hi I wanted to ask you personally for some help so the beam i have this one remote that hen i use the learning button and save to xml command that is for the beam it wont see my button press as a learn able code HOWEVER when i go into the actual menu on a web browser It can learn and send the code I have noticed a tag on p=NEC on the tags that worked and tried making my own but to no avail

Attached is a working code for my tv vs the code I tried for my fan that didn't. the black box is the one that works the red dose not work and i think its because of the p=neccode format and the other shot is the image of the working code through the home interface

8

XML Exchange / Re: Find my phone

« on: September 20, 2017, 12:43:24 AM »

Hi I used this command a while ago and I am looking to see if this is still working for other people the robo.b Does not seem to launch using vc2.2.3.2

9

WAY Off Topic / Re: Trying To create an auto run exe

« on: April 14, 2017, 05:13:14 PM »

Sorry for the confusion what I am trying to do is take my flashdrive (just the one I want this to work on) and when I put it in to my computer it automatically starts typing my password for me. I dont want to have to open something up each time I want to put my password in. I just want to be able to put my usb in and then it automatically start typing my password.

10

WAY Off Topic / Trying To create an auto run exe

« on: April 14, 2017, 04:15:52 PM »

Hi guys so Ill explain what I am Trying to do. What I am trying to do is make a flash drive when plugged in it puts a line of text. What I am mainly trying to do and some people may be against this is trying to make a USB when plugged in imports a password that I set. I want to try and do this with as little interruption as possible meaning nothing is displayed on screen it's just plug it in and boom theirs your really long password. I dont know how I should go about coding this I found very little information so if someone could point me in any direction that would be greatly appreciated.

11

BEAM IR/RF Wifi transceiver / Re: Xml Table not saving Ir codes

« on: March 10, 2017, 03:33:30 PM »

I did that added the 00 and presto everything works !!! thank you so much guys!!!

12

BEAM IR/RF Wifi transceiver / Re: Xml Table not saving Ir codes

« on: March 09, 2017, 07:58:24 PM »

VC 2.2.3.2

the attached picture below works utilizing this feature of the beam (the web page)

however when i tell VC "i want to program case lights" then tell it "I want to program power on" and then press the button on my led remote. When I test it the lights do not come on. buit doing the same steps via the web portal they do !!

I want to be able to send IR codes for my led strips via Beam.

13

BEAM IR/RF Wifi transceiver / Xml Table not saving Ir codes

« on: March 09, 2017, 06:47:23 PM »

Hello!! I have found that when trying to use the beam with the auto generated xml in the mapping table it gets confused (so I think). when using the learn ir code through the webpage I get a really long Ir Code that works for me wanting to turn on a led strip. But when I tell VC that i need to program led strip button power on it saves like normal to the mapping table and then I try test that button witch the beam successfully sends that Ir code but it is not the ir code that is needed to turn the led strip on in other words the wrong ir code. Any fix ?

14

General Discussion / Re: Led Lights And controll

« on: February 02, 2017, 12:26:52 PM »

Awsome !!!! where do I go to get one ??

15

General Discussion / Re: Led Lights And controll

« on: February 01, 2017, 01:39:46 PM »

are you still taking orders on the new beam ?