Messages

1

One on one support / Re: Hungarian recognition and TTS using Google

« on: July 16, 2020, 05:01:53 PM »

Could you please Tell me where is the gtts cache enable option?
(I did not find in the plugin setting or in the options)

2

One on one support / Re: Hungarian recognition and TTS using Google

« on: July 16, 2020, 06:10:26 AM »

solved the inactivity delay issue

The gtts was the lazy part so I put an extra command into the annual restart process-->
Set gtts voice 0
Gtts speak <anyithing>
Sett gtts voice 100

Now there is no delay after a longer inactiv period:)

My other challenge is much less problematic, but sometimes the VC still duplicate the command execution.
(May be when 2 Google speech mic send the speech exactly in the same time)

3

One on one support / Re: Hungarian recognition and TTS using Google

« on: July 15, 2020, 05:39:20 AM »

Thanks Kalle!
I made the setup:)

4

One on one support / Re: Hungarian recognition and TTS using Google

« on: July 14, 2020, 02:07:04 AM »

Probably you are right, because the tested stronger and weaker pc are also used Windows 10.

Now I do not know what else can I do.
After the night, the system answer deadly slow..firstly..and then it is "wake up" and working on the right way, without any modification. It does not need to restart or anyithing else..Im sure that there is some kind of win 10 setup in a sub menu, just I can not figure out what is this.

5

One on one support / Re: Hungarian recognition and TTS using Google

« on: July 13, 2020, 06:45:49 AM »

Yes, exactly!
In my case, it was enabled, even after the reset.

Other question:
The VC running pc after some hour inactivity react very very slowly.
Im tested with different pc-s, but the situation is the same.
In the morning, after the night inactivity, not responding just with 10-15sec delay.
The pc is awake, and the energy saving options are off.

Tonight I Will try to disable again all energy saving option András make a restart, but if you have any other idea please share with me...

6

One on one support / Re: Hungarian recognition and TTS using Google

« on: July 10, 2020, 02:56:25 PM »

Guys Im solved it finally!
The Vera has some kind of security option in a submenu and
because of this, the direct IP connection was not possible, but know everything working!
Now I just need to setup the configuration.

I cant wait also to arrive the Beam:)

When the whole system setup will be ready, I will make a video to show you the results of your efforts:D

7

One on one support / Re: Hungarian recognition and TTS using Google

« on: July 10, 2020, 06:06:58 AM »

Okay, thanks guys...yes I agree, it is not really vc challenge.
I will solve somehow.

(I know that my english is terrible but I try to do my best..thanks for the patience)

8

One on one support / Re: Hungarian recognition and TTS using Google

« on: July 09, 2020, 06:01:44 PM »

After the full reset (again) firstly the IP is working but than, the 2nd login is already use zhis URL

https://vera-us-oem-relay11.mios.com/www/1.7.4969-en/?PK_Device=45101221&lang_code=en&ReturnUrl=aHR0cHM6Ly9ob21lLmdldHZlcmEuY29tL3VzZXJzL2xvZ291dA%3D%3D#dashboard

This url open the controller advanced setting option
https://home.getvera.com/advanced/controller/45101221

Im already wrote to the customer service also, because I cant find the solution.
When Im connecting to the Vera Edge controller it says: Connecting through relay... insted of the local network

my network setup came from a simple router what im using together with my neighborhood.
He's got a complete setup and he made a seperate WLAN what is extended in my apartaman with a range extender.

9

One on one support / Re: Hungarian recognition and TTS using Google

« on: July 08, 2020, 04:34:12 PM »

Men, you are a heroe! Thanks for your time and for the test.

The version 2.3.0.8. include the new
TCP.dll and Actions XML (TCP.GS.GetLastIP) and the INDEX.html (automatically attempt to reconnect after hearing a voice command)

VERA Edge connection issue

If you type 192.168.88.34 into the address bar on your web browser, does it show the Vera page?
No. Now If Im choosing the Vera dashboard/settings/net&wifi/Manually configure
show this

What network connection type do you have?

DHCP
IP address:   
192.168.88.35 If im typed this into the browser address bar, it does not show the Vera page
Subnet mask:   
255.255.255.0
Gateway:   
192.168.88.1
DNS   
192.168.88.1 192.168.0.1


What is the IP address of the computer running VoxCommando?
192.168.88.101

I don't know if it is the cause of the problem but I highly recommend you connect your Edge using an ethernet cable instead of WiFi.
Im made a reset so now the whole configuration is factory deafult, and the device connectiong throug the enthernet cable but the situation is the same.
The Vera dahboard url is this
https://vera-us-oem-relay11.mios.com/www/1.7.4969-en/?PK_Device=45101221&lang_code=en&ReturnUrl=aHR0cHM6Ly9ob21lLmdldHZlcmEuY29tL3VzZXJzL2xvZ291dA%3D%3D#dashboard

10

One on one support / Re: Hungarian recognition and TTS using Google

« on: July 07, 2020, 05:15:03 PM »

Do you have experience with vera edge connection into VC?
I checked the wiki page, the video, and also here the topics but I can ot find the solution...
https://voxcommando.com/mediawiki/index.php?title=Vera_Configuration

So my Vera Edge connectiong through the WIFI and I can reach the dashboard from the browser, but the IP addres not working

Internet/WAN
DHCP
IP address:   
192.168.88.34
Subnet mask:   
255.255.255.0
Gateway:   
192.168.88.1

LAN DHCP server OFF


Im tried the 3480 and 49451 port also.
192.168.88.34:3480
192.168.88.34:49451

Sorry for the question...but Im already checked the Vera forums..and actually I do not have more idea.
What is also interesting, the Vera Edge IP address not visible on the browser address box. There is something like this:
https://vera-us-oem-relay11.mios.com/www/1.7.4969-en/?....

thanks for every help!

11

One on one support / Re: Hungarian recognition and TTS using Google

« on: July 04, 2020, 02:55:51 PM »

Ok I solved the VC restart with SetEventTimer but

how can I count the commands (if I want to trigger an event according to the number of execuded commands?)
how can I reboot the pc (the mouse emulation is the only way or there is more simple possibility?)

12

One on one support / Re: Hungarian recognition and TTS using Google

« on: July 04, 2020, 01:24:38 PM »

Yes, okay it is understandable.
I made a quick search just I didn't find solution for the command counter, but I will try again..

13

One on one support / Re: Hungarian recognition and TTS using Google

« on: July 04, 2020, 11:11:49 AM »

Guys, for the better stability, I would like to make a command what is do this:

Restar the pc every night at 4o' clock
Restart the VC automatically after every 50 command

Someone can help me, how can I make this?

Thanks in advance!

14

One on one support / Re: Hungarian recognition and TTS using Google

« on: June 30, 2020, 05:49:47 PM »

Im still lost with the freezing issue:-(

Now Im tried to modified some setup in spotify app to use less RAM, and succesfuly now the RAM percentage is under 80% (max 82%) constantly, but the VC still freez after ~60-70 command. Probably it is not causing by the RAM.... Everthing else is working and respond but the VC not react.

Any idea?
Should I reinstall the VC or change any setup?
The  GTTS cache can cause this?
(Now Im enabled only the TCP and GTTS plugin)
There is must be a solution...

Thanks guys!

15

One on one support / Re: Hungarian recognition and TTS using Google

« on: June 29, 2020, 04:41:59 PM »

VC freeze
Now I tested and it seems that the 2gb RAM is not enough. When the RAM usage is above 85%, the VC stop working. Is it possible to give more virtual memory somehowe or I need to buy a stronger main pc to run the VC?
(From the 32gb ROM more than 10gb is free. This pc stick is dedicatd to home control, so the VC, Spotify, and Chrome is the only apps what are running on it)