Author Topic: Problem with Prefix on version 0.843 playlist (Read 7048 times)

Kalle · « **on:** November 16, 2010, 07:50:22 AM »

Hi James,

i have tested Ver843MM and that is it (for me ;-)), but the prefixmode not working. When i said prefix "monkey"- "play song ..." i see the command in VC with over 90 precent, but he will not run (the command ist not in red).
The bar with audio warnings is better now, and i found my mic works better, but could also be just imagination.
I have seen in the VC-folder also amulettsofware, do you have already tested the remote control? Works with VC? Is it Bluetooth or UHF?

Kalle

Wanilton · « **Reply #1 on:** November 16, 2010, 08:24:34 AM »

Kalle,

Look first video in this post,

http://www.htforum.com/vb/showthread.php/144704-Usando-Comando-de-voz-para-controlar-seu-midia-center-com-%C3%AAnfase-no-XBMC-Vers%C3%A3o-Dharma?p=2778286&viewfull=1#post2778286

and look this post too
http://voxcommando.com/forum/index.php?topic=324.msg1313;topicseen#msg1313

Wanilton

jitterjames · « **Reply #2 on:** November 16, 2010, 09:12:16 AM »

Quote from: Kalle on November 16, 2010, 07:50:22 AM

i have tested Ver843MM and that is it (for me ;-)), but the prefixmode not working. When i said prefix "monkey"- "play song ..." i see the command in VC with over 90 precent, but he will not run (the command ist not in red).
I have seen in the VC-folder also amulettsofware, do you have already tested the remote control? Works with VC? Is it Bluetooth or UHF?

Hi Kalle. I think you mean the prefix override is not working. Actually I don't think this ever worked properly, even in the last version. Thanks for pointing this out. The regular prefix should still work fine though.

Yes VoxCommando is working well with the Amulet Remote. I have provided a lot of information, and a demo video here: http://voxcommando.com/forum/index.php?topic=324

Kalle · « **Reply #3 on:** November 16, 2010, 09:14:59 AM »

Wanilton and James,

thanks, this remote is a truly excellent device, it is very expensive. in contrast to my iPronto quite a gift (1300 EUR and no support after 5 Years) ;-)
I'm going to buy the remote!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Greetings Kalle

Kalle · « **Reply #4 on:** November 16, 2010, 09:26:49 AM »

Sorry James,

i am confused, i tetsed now and it works,

Kalle

jitterjames · « **Reply #5 on:** November 16, 2010, 10:31:18 AM »

Quote from: Kalle on November 16, 2010, 09:14:59 AM

Wanilton and James,

thanks, this remote is a truly excellent device, it is very expensive. in contrast to my iPronto quite a gift (1300 EUR and no support after 5 Years) ;-)
I'm going to buy the remote!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Greetings Kalle

I guess Eddy will be glad that he came to us...

I would just like to point out that I have not fully tested the remote keymap and learning functions. So far I have not had success learning the codes for any of the buttons for my TV remote. I don't know if I am doing something wrong, or if my TV is unusual but if this feature is important to you, then you might want to wait until I have sorted it out. I think Wanilton is also buying the remote so he may also be able to provide information about his experiences with programming the remote keys to emulate other remotes.

jitterjames · « **Reply #6 on:** November 16, 2010, 10:36:17 AM »

NO, you were right. The prefix override was not working properly.

I updated it to 0.845. Please test.

http://voxcommando.com/forum/index.php?topic=328

Quote

i found my mic works better, but could also be just imagination

yes, I think so.

Kalle · « **Reply #7 on:** November 16, 2010, 11:28:02 AM »

Ok, James prefixmode working fine, the command in prexfixmode is not in red, but it works. In ON-Mode the executed command in VC is displayed red.

Kalle

Kalle · « **Reply #8 on:** November 16, 2010, 08:02:32 PM »

Sorry James,

the prefix mode does not always work, mostly when I switched off the PC. I don't know why.

I can see the right command in VC ("monkey play song ... 89.3%"), but it doesen't work. When i write in options Prefix: Media Monkey (the default) it works always, all the time.
James, can you check this?

Kalle

jitterjames · « **Reply #9 on:** November 16, 2010, 08:43:13 PM »

please send me your voicecommands.xml file

Kalle · « **Reply #10 on:** November 17, 2010, 04:41:12 AM »

Ok, here is it

Kalle · « **Reply #11 on:** November 17, 2010, 05:03:09 AM »

Hi James,

I have tested the following: When I set in the group settings a prefix, it works fine, could be here the problem?

jitterjames · « **Reply #12 on:** November 17, 2010, 09:52:26 AM »

I am trying to figure it out what is going on but I'm having a hard time recreating the problem... It seems to work fine with tellvox, but I cannot test with actual voice commands at the moment because there are people here. I will try to figure it out today though. Sorry for the trouble.

Let me just check the situation:

- you are using the default command tree that I included in MediaMonkey 0.845
- it works if you set the prefix to "media monkey" and then issue a command like "media monkey play song old friends"
- if you change the prefix to "monkey", restart, and then issue a command like "monkey play song old friends" it seems to accept the command, but nothing happens.

does the command show up in the command history window?
does anything show up in the alternates window?

jitterjames · « **Reply #13 on:** November 17, 2010, 11:17:45 AM »

Kalle,

I really can't recreate this problem. You do know that you have to restart VoxCommando after you change the prefix, right?

skylive · « **Reply #14 on:** November 18, 2010, 04:19:37 AM »

I can confirm Kalles Proplem with Prefix Mode.

It definitely does not work in the 0.845 Version.
I tryed to use several Prefixes. For Example: "monkey" (restarted VC)
In yellow Mode VC understands "monkey play" (80%) (MM is already running), but it is not doing anything.

In further Versions the Prefix Mode worked fine.