VoxWav Pro Application Settings

From VoxCommando
Jump to: navigation, search

Return to VoxWav Pro Settings

VWPro app settings.png

General VoxWav Pro Application Settings

Unique device name

Used in VoxCommando when generating events. This value will be available as an event payload for certain events in VoxCommando. Choose a short name to identify your device.

Run in background

Tries to keep CPU and wifi connection active when screen is off. Useful when using the tilt function with the screen off. May increase battery usage when the screen is off, but will use less battery than leaving the screen on.

Pause recording on sleep

Pause recording when the device screen is turned off. This can be very useful when combined with "always on" mode.

For a demonstration of this new feature see Video: New Features in VoxWav 2.71

Prevent device from sleeping

Keeps the screen on while VoxWav is focused.

Override hardware volume buttons

If enabled, when VoxWav's main screen is in the foreground then pressing the volume buttons will send UDP messages that generate AV.Vol.Up and AV.Vol.Down events in VoxCommando. The volume on your phone will not be adjusted.

OSD (On Screen Display)

Enable this in order to view OSD messages from VoxCommando on your Android device. We recommend you leave this on.

Tilt Angle Threshold for Z value

If you are using the tilt feature, you can customize the amount you must tilt your device in order to enable/disable the microphone. Lower values require the device to be closer to perfectly upright. We recommend a value of about 3 to 6.

Vibrate when recording starts and stops

We recommend you turn this on. This will allow you to know when recording starts or stops without looking at the screen. Especially useful with tilt and "always on" mode.

Recording Time Limit

These options may be removed or changed in an upcoming update.

Limit record time

Enable this to avoid long accidental recordings, especially when using tilt mode.

Maximum record time (in seconds)

When "Limit record time" is enabled, this setting determines how long a recording will able to run before being stopped.