VoxWav Pro Network Settings

From VoxCommando
Revision as of 11:25, 13 January 2021 by James (talk | contribs) (1 revision)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

<< Return to VoxWav Pro Settings page.

NOTE: Usually you don't need to modify anything in network settings because this is configured automatically when you use "find hosts" on the main window.

TCP Settings

  • Host Address. Do not edit. Generally set auomatically by the app when you use the "hello" process during installation.
  • Port. Do not edit. Generally set auomatically by the app when you use the "hello" process during installation.

UDP Settings

  • Enable UDP. Default is "on". Used to send touch-based text messages to VoxCommando, such as confirmation messages, choosing an alternate, etc.
  • UDP send port. Default is port 33000. You should only edit this if you've changed the listen port in VoxCommando's Advanced Options.
  • Set the IP address to send to. This should be left at the default value of 255.255.255.255.
  • UDP listen port. Default is port 33335. Do not change this.

Host List

Do not edit. Generally set automatically by the app when you use the "hello" process during installation.

Retrieved from "https://voxcommando.com/mediawiki/index.php?title=VoxWav_Pro_Network_Settings&oldid=307"