VoxWav Pro Network Settings
Revision as of 10:55, 18 April 2015 by Jitterjames (talk)
<< Return to VoxWav Pro Settings page.
NOTE: Usually you don't need to modify anything in network settings because this is configured automatically when you use "find hosts" on the main window.
TCP Settings
- Host Address. Do not edit. Generally set auomatically by the app when you use the "hello" process during installation.
- Port. Do not edit. Generally set auomatically by the app when you use the "hello" process during installation.
UDP Settings
- Enable UDP. Default is "on". Used to send touch-based text messages to VoxCommando, such as confirmation messages, choosing an alternate, etc.
- UDP send port. Default is port 33000. You should only edit this if you've changed the listen port in VoxCommando's Advanced Options.
- Set the IP address to send to. This should be left at the default value of 255.255.255.255.
- UDP listen port. Default is port 33335. Do not change this.
Host List
Do not edit. Generally set automatically by the app when you use the "hello" process during installation.
