VoxCommando

Help and Support (Using VoxCommando) => Kodi (XBMC) Frodo / Gotham / Isengard / Jarvis => Topic started by: StarTiger on January 24, 2013, 09:56:17 PM

Title: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: StarTiger on January 24, 2013, 09:56:17 PM
Hi guys...

Being a complete novice to programming, and also to VoxCommando,  I thought it might be handy to have a place where we can discuss the basic setup of XBMC FRODO and VoxCommando.

I can't seem to get VoxCommando to work very well with frodo.  I'm almost ready to Deinstall Frodo and go back to Eden so I can have something like what I see in the Youtube videos.


Here's what I've got so far...


Installed Frodo via XBMCHUB with the wizard.

Installed VoxCommando v 968 and the extras

I wasn't sure where to install the extras, I put them in the Addons directory under VoxCommando

I selected XBMC when Voxcommando asked me which plugin to default to.

Installed EventGhost.   Not even really sure I need this...


I went into the options in VoxCommando and set up the XBMC name, password, etc, all to defaults with port 8080.

fired up XBMC and set up the same server info there...

What about UDPD?  I enabled it because alot of the videos I've seen see to show you guys with it enabled...

VoxCommando is running on the same PC as XBMC, so server address is set to 127.0.0.1

I have udpd enabled in my router also.

My local firewall is off, and I even disabled my virus check (AVG) temporarily...

When I try to getXML, I'm choosing frodo...

I click the button and I immediately get a 404 server not found error.

I double checked that my firewall is off.

I seem to be able to do some basic navigation in the menus of XBMC via VoxCommando, but I'm not sure if it's MS SPEECH doing it or VC....

I found your VoxComm 1.3 file, installed it, enabled the plugin, shut everything off then booted it back up, but I still have the same results...

Not sure if I'm doing something wrong, or if functionality of VoxCommando on Frodo just isn't right yet...

Any help would be great!

Update:

I've played in the firewall settings some more, Still can't get it to work.  I completely turned windows firewall off, still nothing....





Oh, and I do plan to purchase, James.... I'm just waiting to get it working...
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: Kalle on January 25, 2013, 03:57:02 AM
Hi StarTiger and welcome in VC forum. To use VoxCommando with Frodo is a tricky part (at the moment)  ;)

If you have installed the standard XBMC configuration with VC it will works only with "XBMC Eden", please take a look here: http://voxcommando.com/forum/index.php?topic=982.msg8191#msg8191 (http://voxcommando.com/forum/index.php?topic=982.msg8191#msg8191)

If you want really use VC with Frodo, you need the latest Version of VC - http://voxcommando.com/forum/index.php?topic=969.0 (http://voxcommando.com/forum/index.php?topic=969.0)

and read also this thread: http://voxcommando.com/forum/index.php?topic=940.0 (http://voxcommando.com/forum/index.php?topic=940.0)

You don't need Eventghost to use VC with XBMC, if you need more basics e.g. "how to configure VC, create commands ...", you find a good start when you click on the "WIKI" button here in Forum.
I'm not sure what you mean with "extras" - but mostly the "extras" have some plugins for VC that you can put in the plugin folder of VoxCommando.

If you have more questions you are welcome to ask.

Kalle
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: jitterjames on January 25, 2013, 08:24:16 AM
Sounds like you've set things up correctly, but you are trying to use the eden version with Frodo.

 I will be releasing the Frodo ready version later today.

You don't need the extras normally, that's why they are "extra".  They don't go in plugins.  You don't need event ghost, but it could be useful for other things depending on what you set up.
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: jitterjames on January 25, 2013, 05:23:01 PM
http://voxcommando.com/forum/index.php?topic=984.0
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: StarTiger on January 25, 2013, 06:23:49 PM
Hey. thanks for all the great tips everyone!

So here's what's happened since I last posted...

I uninstalled frodo and dropped in eden 11.0 and then used the Noli_Soco_So Entertainment Injection to set it up, that sure was a painless install, let me tell you!

Cost me $25 bucks, but I like the fact that I can back all my setup up now and then load them back in. Unfortunately it seems to be using Eden only, I'll try it later and report back with Frodo.

I was using XBMCHUB's wizard before that on Frodo.



So now VC's working slightly better... at least the XML part is grabbing my movies and tv shows.

But I have about 3/4 of a terabyte of mp3's and it doesn't grab any of those.

I'm also having an issue with it recognizing my voice commands.  I've ran thru the extended training on MS speech 8.0, but it's like I can see VC listening to me, it seems to get the main command and then fail on the file names.


I'd be willing to read the thing a Harry Potter book if it'd just recognize me better... I with it had "extended-extended Training"...


Does MS speech need to be running (the small floating app that says 'Listening')  when Voxcommander is running?

I'm tempted to get the Frodo RC3 again and try that with the .969 version.

also, when I'm asking it to move around in menus, I say "Move up 2" and the command reccognizes "move up 2" but it's moving a random amount over that, 3, sometimes 4, etc.

Is this because I have event player installed or because I have MS speech's app up also?

Also, changing volume settings is acting strange.   I seem to be able to move volume down, but can't get it to go back up... Strange.  It works so well in the youtube videos!


I'll uninstall it, and try-try-try again...


Eventually I'm gonna get this XBMC box straightened out, then I'm gonna ghost it so if it breaks I can go back to a working box.

I've been working on this system for weeks now. I'm sick of installing/uninstalling programs. I just want it to work.   ;D


But again, thanks for the help, and you'll be seeing my questions a lot probably!

~~~~TIGER


:bonk
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: Kalle on January 25, 2013, 06:34:31 PM
Hey. thanks for all the great tips everyone!

So here's what's happened since I last posted...

...
...

~~~~TIGER


:bonk
Hi StarTiger, to work with Frodo you need VC980 from here http://voxcommando.com/forum/index.php?topic=984.0 (http://voxcommando.com/forum/index.php?topic=984.0)
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: jitterjames on January 25, 2013, 06:49:40 PM
Ms speech should not be running.  It may well be causing your multiple moves, and other anomolies.

Extended training is not going to help you unless you have an unusual accent, or your English is not very good.  If you are British, or American English speaker, and it is not understanding you, then there is a problem with your microphone, or you are not saying the correct commands, or something along those lines.

750 gigs of audio will probably be a problem, especially if your tagging is a mess.  Usually when people have a library this size, their tagging is a mess...  either way you will probably need to remove the play song commands, and only keep artist, and album commands.
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: StarTiger on January 25, 2013, 07:08:12 PM
Oh yes, James, I'm sure the tagging is ALL messed up, it's a hodge podge of various collections from over the years.

I'm looking at a utility called Tuneup that appears to be able to fix my tags issues... it's here :    http://www.tuneupmedia.com/ (http://www.tuneupmedia.com/)

think I'll run that before I redo XBMC FRODO

Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: StarTiger on January 25, 2013, 07:13:54 PM
Kalle reported two different versions, .969 and .984 that work with FRODO... Which one is the RIGHT one..

I'm assuming (which I hate to do) that .969 is the newest version that you're putting up today?

thanks
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: jitterjames on January 25, 2013, 08:47:43 PM
0.980 is the latest version which I uploaded today, and which both Kalle and I provided a link to in this thread.
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: jitterjames on January 25, 2013, 08:51:16 PM
You appear to be confusing the topic number that appears at the end of the forum URLs, with the version of VC.  :bonk

It is an unfortunate coincidence that they are quite similar at the moment.
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: StarTiger on February 01, 2013, 01:36:29 AM
you are quite correct sir..... I won't let it happen again!
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: lokipoki on February 02, 2013, 11:56:24 PM
Hi there.

If got an issue to setup the xml for xbmc frodo as well  :(

Let me start with what i did:

1. Install VC 0.98> choose Frodo RC3 (which I have installed)
2. Option>XBMC>IP: 127.0.0.1 (cause XBMC is on the same machine),Port:8080
3. Plugin XJSON>IP: 127.0.0.1 (cause XBMC is on the same machine),Port:8080
4. Install VoxCommando Tool in XBMC
5. In XBMC set port to 8080

I watched the tutorial twice ;)

This is what happens:

1. If I go into GenXML>Open Form>click on movies I get:"can`t connect" getting this log:

3/02/2013 2:43:12 PM   577   sorry! error connecting to XBMC
 ip: 127.0.0.1
port: 8080
port: System.Net.WebException: The remote server returned an error: (404) Not Found.
   at System.Net.HttpWebRequest.GetResponse()
   at VoxCommando.XBMCcommander.f(String A_0)
3/02/2013 2:43:12 PM   577   System.InvalidOperationException: The remote server returned an error: (404) Not Found.
   at VoxCommando.XBMCcommander.a(String A_0, VoxOptions A_1)
   at ai.v(Object A_0, EventArgs A_1)


2. But when I press Gen XBMC Frodo, VC finds all music and movies and creates the XBMC payloads
3. When I go into xsql plugin the music and video database both are green.
4. I got this movie info script:

<?xml version="1.0" encoding="utf-8"?>
<VoiceCommands version="" date="2/3/2013 12:00:00 AM">
    <commandGroup open="False" name="XBMC Get Movie Info" enabled="True" prefix="" priority="0" requiredProcess="" description="">
        <command id="0" name="Get Movie Info" enabled="true" alwaysOn="False" confirm="False" requiredConfidence="0" loop="False" loopDelay="0" loopMax="0" description="">
            <action>
                <cmdType>XBMC.Send</cmdType>
                <cmdString>getcurrentlyplaying</cmdString>
                <cmdRepeat>1</cmdRepeat>
            </action>
            <action>
                <cmdType>Results.RegEx</cmdType>
                <cmdString>Title:(.*)</cmdString>
                <cmdRepeat>1</cmdRepeat>
            </action>
            <action>
                <cmdType>TTS.SpeakSync</cmdType>
                <cmdString>You are currently watching {match.1}</cmdString>
                <cmdRepeat>1</cmdRepeat>
            </action>
            <phrase>What movie is this</phrase>
        </command>        
    </commandGroup>
</VoiceCommands>

After I added it to voice commands and execute it and get this log with Anna saying match1 instead of the movie:

3/02/2013 2:43:59 PM   661   Action:  XBMC.Send - getcurrentlyplaying
3/02/2013 2:43:59 PM   662   sorry! error connecting to XBMC
 ip: 127.0.0.1
port: 8080
port: System.Net.WebException: The remote server returned an error: (404) Not Found.
   at System.Net.HttpWebRequest.GetResponse()
   at VoxCommando.XBMCcommander.f(String A_0)
3/02/2013 2:43:59 PM   676   action repeat set to: 1
3/02/2013 2:43:59 PM   676   Action:  Results.RegEx - Title:(.*)
3/02/2013 2:43:59 PM   687   action repeat set to: 1
3/02/2013 2:43:59 PM   687   Action:  TTS.SpeakSync - You are currently watching {match.1}


What am I doing wrong?!

I`m very new to all of this. So be kind with me ;)

Thanks in advance.
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: Kalle on February 03, 2013, 03:00:21 AM
Hi there.

If got an issue to setup the xml for xbmc frodo as well  :(

...
...

What am I doing wrong?!

I`m very new to all of this. So be kind with me ;)

Thanks in advance.
Hi lokipoki and welcome in the forum.
Please check your XBMC network settings again, it is important that you set a checkmark "allowed remote access" in XBMC sevices. Take a look at 7m 48s in the english video from James.

Kalle
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: lokipoki on February 03, 2013, 03:17:14 AM
Under Remote Control I ticked both boxes. I ticked the box in Webserver as well. Furthermore all boxes in UPnP.

I really don`t what to do...
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: Kalle on February 03, 2013, 03:34:24 AM
Under Remote Control I ticked both boxes. I ticked the box in Webserver as well. Furthermore all boxes in UPnP.

I really don`t what to do...
By the way, do you have installed VC with commands for XBMC Frodo 12 english and not with the XBMC Eden commands?
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: lokipoki on February 03, 2013, 04:20:27 AM
1. Install VC 0.98> choose Frodo RC3
2. Under Voxcommandos>XBMC Version Frodo (12)
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: lokipoki on February 03, 2013, 05:06:20 AM
I`m using the android remote on port 8080 (not at the same time though) as well.

Would that be a problem?
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: Kalle on February 03, 2013, 05:11:05 AM
I`m using the android remote on port 8080 (not at the same time though) as well.

Would that be a problem?
does work the other commands for xbmc, like "what song is this", "play song ..."?
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: lokipoki on February 03, 2013, 05:25:00 AM
Curiously they do. And as I said the payloads do work as well.
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: Kalle on February 03, 2013, 07:17:04 AM
Curiously they do. And as I said the payloads do work as well.
So we can say - your database for music works, is this right?
please select the movie database in the VC XSQL plugin by hand and click "generate and save" again. Let us know if it works or not.
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: lokipoki on February 03, 2013, 07:56:48 AM
That is the weird thing both databases work after pressing gen xbmc frodo. But not manually.

But the movie info does not seemed to work.
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: jitterjames on February 03, 2013, 08:33:33 AM
Hi Lokipoki, welcome to VC  ;D

Sounds to me like everything is working properly.  You are able to use genXML.  Just don't try to use the old Eden method (which was not shown in the video tutorial).

The command you are trying to import was for eden. That's why it does not work.  Where did you get it?

I think that the default Frodo configuration already had a command to ask "What movie is this?", so I'm not sure why you are trying to import an old command.

I'll go check on that ;)
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: jitterjames on February 03, 2013, 09:53:02 AM
Confirmed.  There is already a command: "what movie is this?" included in the standard Frodo configuration.
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: lokipoki on February 03, 2013, 03:53:35 PM
Thanks for your reply. It would make sense  ::) I have a look into that when I come home.
Title: Re: VOXCOMMANDER & XBMC FRODO SETUP FOR BEGINNERS
Post by: lokipoki on February 04, 2013, 06:42:27 AM
All good mate. Sill me  ::)

I`m happy to purchased voxcommando now!